TITANIUM DISTRIBUTOR

Titanium Supplier

 

Titanium is 30% stronger than steel, but is nearly 50% lighter. Titanium is 60% heavier than aluminum, but twice as strong. Titanium has excellent strength retention to 1,000 degrees Fahrenheit. Titanium is alloyed with aluminum, manganese, iron, molybdenum and other metals to increase strength, to withstand high temperatures, and to lighten the resultant alloy. Titanium’s high corrosion resistance is also a valuable characteristic; as when exposed to the atmosphere, titanium forms a tight, tenacious oxide film that resists many corrosive materials, particularly salt water.

 

In the 1950s, the titanium metal industry was established primarily in response to the emerging aerospace industry, which used it in the manufacture of airframe structural components and skin, aircraft hydraulic systems, air engine components, rockets, missiles, and spacecraft, where these properties are invaluable. The military also uses titanium in its guided missiles and in artillery. Other practical applications have evolved over time such as shipbuilding: in submarines, ship’s propellers, shafts, rigging, and other highly corrosive parts. Titanium is being increasingly utilized for medical applications due to its lightweight, its strength, and its hypoallergenic properties, as titanium is also nickel free. Titanium products are becoming increasingly utilized in other industries as well, from petrochemical applications to sporting goods.

 

For more information or to receive a prompt titanium alloy price quote, please contact us at 800 398-4345 or 954-977-0666 or submit the INSTAQUOTE Form. 

SERVING THE AEROSPACE INDUSTRY SINCE 1978
SERVING THE AEROSPACE INDUSTRY SINCE 1978
SERVING THE AEROSPACE INDUSTRY SINCE 1978
Previous slide
Next slide

SHEET, PLATE & COIL

Sizes: Sheets & Plate

0.012" TO 4.00" x R/W x R/L

Sizes: Coil

0.001" TO 0.011 x R/W x R/L

GRADE SPECIFICATIONS
6AL-4V, 6AL-4VELI AMS-4911, 4907, 4905, MIL-T-9045

ASTM-F136, DMS-1592, GM3103, 12TM-B265

6AL-2SN-4ZR-2MO AMS-4919, MIL-T-9046, DMS-2275, AMS-T-9046,

GM-3104, B50TF21

6AL-6V-2SN AMS-4918, MIL-T-9046, DMS-1879, AMS-T-9046
5AL-2.55N,

5-2.5 ELI

AMS-4909, 4910, MIL-T-9046, AMS-T-9046
BAL-1MO-1V AMS-4915, 4916, DMS-1784
CP-GRADES 1,2,3,4 AMS-4900, 4902, MIL-T-9046, AMS-T-9046, DMS-1536, ASTM-B265
15V-3CR-3SN-3AL AMS-4914
SERVING THE AEROSPACE INDUSTRY SINCE 1978
SERVING THE AEROSPACE INDUSTRY SINCE 1978
SERVING THE AEROSPACE INDUSTRY SINCE 1978
SERVING THE AEROSPACE INDUSTRY SINCE 1978
Previous slide
Next slide

ROD, BAR & FORGINGS

Full Range Of Sizes In All Grades GRADE SPECIFICATIONS
6AL-4V, 6AL-4VELI AMS-4928, 4930,4965, 4967, MIL-T-9047, AMS-T-9047, ASTM-F-367
6AL-2SN-4ZR-2MO AMS-4975, MIL-T-9047, AMS-T-9047
6AL-6V-2SN AMS-4978, MIL-T-9047, AMS-T-9047
5AL-2.55N AMS-4926, 4966, MIL-T-9047, AMS-T-9047, B50TF22
8AL-IMO-IV AMS-4972, 4973, MIL-T-9047, AMS-T-9047
CP-GRADES 1,2,3,4,7 AMS-4921, MIL-9047, ASTM-B-348, ASTM-F-67
SERVING THE AEROSPACE INDUSTRY SINCE 1978

TUBING

Full Range Of Sizes In All Grades GRADE SPECIFICATIONS
CP-GRADES 2,3,4 AMS-4941, 4942, BMS-7-21, DMS-1872, 1874, 1898
3AL-2.5V AMS-4943, 4944, 4945, DMS-2241, B50TF35, PWA-1260
SERVING THE AEROSPACE INDUSTRY SINCE 1978

EXTRUSIONS

Full Range Of Sizes In All Grades GRADE SPECIFICATIONS
6AL-4V AMS-4934, 4935, MIL-T-81556
6AL-6V-2SN AMS-4937, MIL-T-81556
8AL-IV-IMO AMS-4933
SERVING THE AEROSPACE INDUSTRY SINCE 1978

COMMERCIALLY PURE TITANIUM SHEETS

GRADE BRITISH

STANDARD

FRANCE GERMAN

AEROSPACE

Gr. 1 BS 2TA 1 T-35 3.7024
Gr. 2 BS 2TA 2 T-40 3.7034
Gr. 3 DTD5023 T-50 3.7054
Gr. 4 BS 2TA 6 T-60 3.7064

ON-TIME DELIVERY

TECHNICAL DATA SHEETS

Titanium Grade 1 is an unalloyed, low strength titanium product containing low oxygen with high formability; this titanium grade is used in airframes, heat exchangers and desalination units.

Titanium Grade 1

Titanium Grade 1, Annealed 

Titanium Grade 2 is an unalloyed, medium strength titanium product. This titanium grade is used in airframes, aircraft engines, and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.

Titanium Grade 2 

Titanium Grade 2, Annealed 

  

Titanium Grade 3 is an unalloyed, high strength, titanium product providing excellent corrosion resistance and good weldability. This titanium grade is primarily used in airframe and aircraft engine parts.

Titanium Grade 3

Titanium Grade 3, Annealed

Titanium Grade 4 is the highest strength pure unalloyed titanium product. This titanium grade is used almost exclusively for airframe, aircraft engine parts, marine, surgical implants, hydraulic tubing. Good formability and corrosion resistance are its hallmark.

Titanium Grade 4

Titanium Grade 4, Annealed

Titanium Grade 5 (6AL-4V) is an alloyed titanium product containing 6% Aluminum and 4% Vanadium; is a medium strength product. This titanium grade is predominantly used in airframe and turbine engine parts; and for use in surgical implants.

Titanium Ti-6Al-4V (Grade 5), Annealed 

Titanium Ti-6Al-4V (Grade 5), Annealed Bar

Titanium Ti-6Al-4V (Grade 5), STA

Titanium Ti-6Al-4V (Grade 5), STA Bar

Titanium 6AL – 4V ELI is an alloyed titanium product containing 6% Aluminum and 4% Vanadium, ELI (Extra Low Interstitial).

Titanium Ti-6Al-4V (Grade 5), ELI, Annealed

3AL-2.5V is an alloyed titanium product containing 3% Aluminum and 2.5% Vanadium

3AL-2.5V, alpha annealed

3AL-2.5V, Alpha-Beta Annealed, Quenched 

3AL-2.5V, Beta-Annealed, 950ºC

3AL-2.5V, ST 925ºC, Aged 480ºC

5AL–2.5Sn & ELI (5-2.5) is an alloyed titanium product containing 5% Aluminum and 2.5% Tin. Also ELI (Extra Low Interstitial).

5AL–2.5Sn

5AL–2.5Sn ELI, Annealed 

6AL–2Sn–4Zr–2Mo (6-2-4-2) is an alloyed titanium product containing 6% Aluminum, 2% Tin, 4% Zirconium, 2% Molybdenum.

6AL–2Sn–4Zr–2Mo (6-2-4-2), Duplex Annealed

6AL–2Sn–4Zr–2Mo (6-2-4-2), Sheet

6AL–6V–2Sn (6-6-2) is an alloyed titanium product containing 6% Aluminum, 6% Vanadium, 2% Tin.

6AL–6V–2Sn (6-6-2) Annealed

6AL–6V–2Sn (6-6-2), STA 870ºC/565ºC

6AL–6V–2Sn (6-6-2), STA 910ºC/540ºC

8AL–1Mo – 1V (8-1-1) is an alloyed titanium product containing 8% Aluminum, 1% Molybdenum and 1% Vanadium.

8AL–1Mo – 1V (8-1-1)

8AL–1Mo – 1V (8-1-1), Annealed 8 hr at 790ºC (1450ºF)

8AL–1Mo – 1V (8-1-1) Duplex Annealed

8AL–1Mo – 1V (8-1-1) Beta Annealed, Aged

8AL–1Mo – 1V (8-1-1) Beta Solution Treated 

8AL–1Mo – 1V (8-1-1) ST 980ºC (1800ºF), Aged 595ºC

 

 

15V–3Cr–4AL–3Sn (15-3-3-3) is an alloyed titanium product containing 15% Vanadium, 3% Chromium, 4% Aluminum, 3% Tin.

15V–3Cr–4AL–3Sn (15-3-3-3), Solution Treated

15V–3Cr–4AL–3Sn (15-3-3-3), ST 790ºC, Aged 480ºC

15V–3Cr–4AL–3Sn (15-3-3-3), ST 850ºC (1560ºF), Aged 545ºC

 

STILL HAVE ANY QUESTIONS?  IS SOMETHING UNCLEAR?  DO NOT SEE WHAT YOU ARE LOOKING FOR?  AEROSPACE SPECIFICATION SERVICES FRIENDLY SALES TEAM IS WAITING FOR YOUR CALL AT 800-398-4345 OR SEND US AN EMAIL 

Scroll to Top